ELECTROLYTEPLASMAPOLISHING
| PROCESSDESCRIPTION | |
| EQUIPMENT | |
| PHOTOS | |
| ADVANTAGES | |
| F.A.Q. | |
| NEWS | |
| PRICE | |
| CONTACTS |
EQUIPMENT
The equipment for plasmaelectrolyte polishing usually involves 3 components:
- The tank with electrolyte that has work-pieces transfer mechanism, ventilating cap, heaters and other devices.
- Power supply that generates the electricity for the process.
- Control board that allows to operate in setting-up and automatic conditions. Control board supports to set temperature and time as well as interlock for safeguarding
The necessary equipment for mounting:
-3p 380/220V AC power circuit
- water flood cooling or special cooling system
- Compressed air system
- exhaust ventilation
|
Specification : |
|
|
Anode voltage, (V) DC: |
200-300 |
|
Current density (A/cm2): |
0.15-0.25 |
| Ra (micrometers) | 0.08 - 0.05 |
| Time of treatment (minutes) (depending on initial and required roughness) | 0.5 - 10 |
|
Electrolyte composition |
|
| Water % | 93-97 |
| Inorganic salt % | 3-7 |
| pH | 4-7 |
| Specific consumption of electric power , KWH/decimetre square | 0.05 - 0.5 |
| -Working tank dimensions are dependent from work pieces dimensions and will be especially designed according to the customer requirements. | |
|
-Series of power supply available 10, 40, 63, 100, 250, 400, 630, 1000 kW.
|
